16S rRNA sequencing reveals likely beneficial core microbes within faecal samples of the EU protected slug Geomalacus maculosus

The EU-protected slug Geomalacus maculosus Allman occurs only in the West of Ireland and in northern Spain and Portugal. We explored the microbial community found within the faeces of Irish specimens with a view to determining whether a core microbiome existed among geographically isolated slugs which could give insight into the adaptations of G. maculosus to the available food resources within its habitat. Faecal samples of 30 wild specimens were collected throughout its Irish range and the V3 region of the bacterial 16S rRNA gene was sequenced using Illumina MiSeq. To investigate the influence of diet on the microbial composition, faecal samples were taken and sequenced from six laboratory reared slugs which were raised on two different foods. We found a widely diverse microbiome dominated by Enterobacteriales with three core OTUs shared between all specimens. While the reared specimens appeared clearly separated by diet in NMDS plots, no significant difference between the slugs fed on the two different diets was found. Our results indicate that while the majority of the faecal microbiome of G. maculosus is probably dependent on the microhabitat of the individual slugs, parts of it are likely selected for by the host

The active microbial community more accurately reflects the anaerobic digestion process: 16S rRNA (gene) sequencing as a predictive tool

Background: Amplicon sequencing methods targeting the 16S rRNA gene have been used extensively to investigate microbial community composition and dynamics in anaerobic digestion. These methods successfully characterize amplicons but do not distinguish micro-organisms that are actually responsible for the process. In this research, the archaeal and bacterial community of 48 full-scale anaerobic digestion plants were evaluated on DNA (total community) and RNA (active community) level via 16S rRNA (gene) amplicon sequencing. Results: A significantly higher diversity on DNA compared with the RNA level was observed for archaea, but not for bacteria. Beta diversity analysis showed a significant difference in community composition between the DNA and RNA of both bacteria and archaea. This related with 25.5 and 42.3% of total OTUs for bacteria and archaea, respectively, that showed a significant difference in their DNA and RNA profiles. Similar operational parameters affected the bacterial and archaeal community, yet the differentiating effect between DNA and RNA was much stronger for archaea. Co-occurrence networks and functional prediction profiling confirmed the clear differentiation between DNA and RNA profiles. Conclusions: In conclusion, a clear difference in active (RNA) and total (DNA) community profiles was observed, implying the need for a combined approach to estimate community stability in anaerobic digestion

NanoAmpli-Seq: a workflow for amplicon sequencing for mixed microbial communities on the nanopore sequencing platform

Background: Amplicon sequencing on Illumina sequencing platforms leverages their deep sequencing and multiplexing capacity but is limited in genetic resolution due to short read lengths. While Oxford Nanopore or Pacific Biosciences sequencing platforms overcome this limitation, their application has been limited due to higher error rates or lower data output. Results: In this study, we introduce an amplicon sequencing workflow, i.e., NanoAmpli-Seq, that builds on the intramolecular-ligated nanopore consensus sequencing (INC-Seq) approach and demonstrate its application for full-length 16S rRNA gene sequencing. NanoAmpli-Seq includes vital improvements to the INC-Seq protocol that reduces sample processing time while significantly improving sequence accuracy. The developed protocol includes chopSeq software for fragmentation and read orientation correction of INC-Seq consensus reads while nanoClust algorithm was designed for read partitioning-based de novo clustering and within cluster consensus calling to obtain accurate full-length 16S rRNA gene sequences. Conclusions: NanoAmpli-Seq accurately estimates the diversity of tested mock communities with average consensus sequence accuracy of 99.5% for 2D and 1D2 sequencing on the nanopore sequencing platform. Nearly all residual errors in NanoAmpli-Seq sequences originate from deletions in homopolymer regions, indicating that homopolymer aware base calling or error correction may allow for sequencing accuracy comparable to short-read sequencing platforms

An automated identification and analysis of ontological terms in gastrointestinal diseases and nutrition-related literature provides useful insights

With an unprecedented growth in the biomedical literature, keeping up to date with the new developments presents an immense challenge. Publications are often studied in isolation of the established literature, with interpretation being subjective and often introducing human bias. With ontology-driven annotation of biomedical data gaining popularity in recent years and online databases offering metatags with rich textual information, it is now possible to automatically text-mine ontological terms and complement the laborious task of manual management, interpretation, and analysis of the accumulated literature with downstream statistical analysis. In this paper, we have formulated an automated workflow through which we have identified ontological information, including nutrition-related terms in PubMed abstracts (from 1991 to 2016) for two main types of Inflammatory Bowel Diseases: Crohn’s Disease and Ulcerative Colitis; and two other gastrointestinal (GI) diseases, namely, Coeliac Disease and Irritable Bowel Syndrome. Our analysis reveals unique clustering patterns as well as spatial and temporal trends inherent to the considered GI diseases in terms of literature that has been accumulated so far. Although automated interpretation cannot replace human judgement, the developed workflow shows promising results and can be a useful tool in systematic literature reviews. The workflow is available at https://github.com/KociOrges/pytag

Metagenomic sequencing unravels gene fragments with phylogenetic signatures of O2-tolerant NiFe membrane-bound hydrogenases in lacustrine sediment

Many promising hydrogen technologies utilising hydrogenase enzymes have been slowed by the fact that most hydrogenases are extremely sensitive to O2. Within the group 1 membrane-bound NiFe hydrogenase, naturally occurring tolerant enzymes do exist, and O2 tolerance has been largely attributed to changes in iron–sulphur clusters coordinated by different numbers of cysteine residues in the enzyme’s small subunit. Indeed, previous work has provided a robust phylogenetic signature of O2 tolerance [1], which when combined with new sequencing technologies makes bio prospecting in nature a far more viable endeavour. However, making sense of such a vast diversity is still challenging and could be simplified if known species with O2-tolerant enzymes were annotated with information on metabolism and natural environments. Here, we utilised a bioinformatics approach to compare O2-tolerant and sensitive membrane-bound NiFe hydrogenases from 177 bacterial species with fully sequenced genomes for differences in their taxonomy, O2 requirements, and natural environment. Following this, we interrogated a metagenome from lacustrine surface sediment for novel hydrogenases via high-throughput shotgun DNA sequencing using the Illumina™ MiSeq platform. We found 44 new NiFe group 1 membrane-bound hydrogenase sequence fragments, five of which segregated with the tolerant group on the phylogenetic tree of the enzyme’s small subunit, and four with the large subunit, indicating de novo O2-tolerant protein sequences that could help engineer more efficient hydrogenases

Bacterial community analysis in upflow multilayer anaerobic reactor (UMAR) treating high-solids organic wastes

A novel anaerobic digestion configuration, the upflow multi-layer anaerobic reactor (UMAR), was developed to treat high-solids organic wastes. The UMAR was hypothesized to form multi-layer along depth due to the upflow plug flow; use of a recirculation system and a rotating distributor and baffles aimed to assist treating high-solids influent. The chemical oxygen demand (COD) removal efficiency and methane (CH4) production rate were 89% and 2.10 L CH4/L/day, respectively, at the peak influent COD concentration (110.4 g/L) and organic loading rate (7.5 g COD/L/day). The 454 pyrosequencing results clearly indicated heterogeneous distribution of bacterial communities at different vertical locations (upper, middle, and bottom) of the UMAR. Firmicutes was the dominant (>70%) phylum at the middle and bottom parts, while Deltaproteobacteria and Chloroflexi were only found in the upper part. Potential functions of the bacteria were discussed to speculate on their roles in the anaerobic performance of the UMAR system

Molecular insights informing factors affecting low temperature anaerobic applications: diversity, collated core microbiomes and complexity stability relationships in LCFA-fed systems

Fats, oil and grease, and their hydrolyzed counterparts-long chain fatty acids (LCFA) make up a large fraction of numerous wastewaters and are challenging to degrade anaerobically, more so, in low temperature anaerobic digestion (LtAD) systems. Herein, we perform a comparative analysis of publicly available Illumina 16S rRNA datasets generated from LCFA-degrading anaerobic microbiomes at low temperatures (10 and 20 °C) to comprehend the factors affecting microbial community dynamics. The various factors considered were the inoculum, substrate and operational characteristics, the reactor operation mode and reactor configuration, and the type of nucleic acid sequenced. We found that LCFA-degrading anaerobic microbiomes were differentiated primarily by inoculum characteristics (inoculum source and morphology) in comparison to the other factors tested. Inoculum characteristics prominently shaped the species richness, species evenness and beta-diversity patterns in the microbiomes even after long term operation of continuous reactors up to 150 days, implying the choice of inoculum needs careful consideration. The generalised additive models represented through beta diversity contour plots revealed that psychrophilic bacteria RBG-13-54-9 from family Anaerolineae, and taxa WCHB1–41 and Williamwhitmania were highly abundant in LCFA-fed microbial niches, suggesting their role in anaerobic treatment of LCFAs at low temperatures of 10–20 °C. Overall, we showed that the following bacterial genera: uncultured Propionibacteriaceae, Longilinea, Christensenellaceae R7 group, Lactivibrio, candidatus Caldatribacterium, Aminicenantales, Syntrophus, Syntrophomonas, Smithella, RBG-13-54-9, WCHB1–41, Trichococcus, Proteiniclasticum, SBR1031, Lutibacter and Lentimicrobium have prominent roles in LtAD of LCFA-rich wastewaters at 10–20 °C. This study provides molecular insights of anaerobic LCFA degradation under low temperatures from collated datasets and will aid in improving LtAD systems for treating LCFA-rich wastewaters

Biokinetics Of microbial consortia using biogenic sulfur as a novel electron donor for sustainable denitrification

In this study, the biokinetics of autotrophic denitrification with biogenic S0 (ADBIOS) for the treatment of nitrogen pollution in wastewaters were investigated. The used biogenic S0, a by-product of gas desulfurization, was an elemental microcrystalline orthorhombic sulfur with a median size of 4.69 µm and a specific surface area of 3.38 m2/g, which made S0 particularly reactive and bioavailable. During denitritation, the biomass enriched on nitrite (NO2–) was capable of degrading up to 240 mg/l NO2–-N with a denitritation activity of 339.5 mg NO2–-N/g VSS·d. The use of biogenic S0 induced a low NO2–-N accumulation, hindering the NO2–-N negative impact on the denitrifying consortia and resulting in a specific denitrification activity of 223.0 mg NO3–-N/g VSS·d. Besides Thiobacillus being the most abundant genus, Moheibacter and Thermomonas were predominantly selected for denitrification and denitritation, respectively

A Comprehensive Benchmarking Study of Protocols and Sequencing Platforms for 16s Rrna Community Profiling

In the last 5 years, the rapid pace of innovations and improvements in sequencing technologies has completely changed the landscape of metagenomic and metagenetic experiments. Therefore, it is critical to benchmark the various methodologies for interrogating the composition of microbial communities, so that we can assess their strengths and limitations. The most common phylogenetic marker for microbial community diversity studies is the 16S ribosomal RNA gene and in the last 10 years the field has moved from sequencing a small number of amplicons and samples to more complex studies where thousands of samples and multiple different gene regions are interrogated. Results: Weassembled2syntheticcommunitieswithaneven(EM)anduneven(UM)distributionofarchaealand bacterial strains and species, as metagenomic control material, to assess performance of different experimental strategies. The 2 synthetic communities were used in this study, to highlight the limitations and the advantages of the leading sequencing platforms: MiSeq (Illumina), The Pacific Biosciences RSII, 454 GS-FLX/+ (Roche), and IonTorrent (Life Technologies). We describe an extensive survey based on synthetic communities using 3 experimental designs (fusion primers, universal tailed tag, ligated adaptors) across the 9 hypervariable 16S rDNA regions. We demonstrate that library preparation methodology can affect data interpretation due to different error and chimera rates generated during the procedure. The observed community composition was always biased, to a degree that depended on the platform, sequenced region and primer choice. However, crucially, our analysis suggests that 16S rRNA sequencing is still quantitative, in that relative changes in abundance of taxa between samples can be recovered, despite these biases. Conclusion: Wehaveassessedarangeofexperimentalconditionsacrossseveralnextgenerationsequencing platforms using the most up-to-date configurations. We propose that the choice of sequencing platform and experimental design needs to be taken into consideration in the early stage of a project by running a small trial consisting of several hypervariable regions to quantify the discriminatory power of each region. We also suggest that the use of a synthetic community as a positive control would be beneficial to identify the potential biases and procedural drawbacks that may lead to data misinterpretation. The results of this study will serve as a guideline for making decisions on which experimental condition and sequencing platform to consider to achieve the best microbial profiling

Beyond basic diversity estimates – analytical tools for mechanistic interpretations of amplicon sequencing data

Understanding microbial ecology through amplifying short read regions, typically 16S rRNA for prokaryotic species or 18S rRNA for eukaryotic species, remains a popular, economical choice. These methods provide relative abundances of key microbial taxa, which, depending on the experimental design, can be used to infer mechanistic ecological underpinnings. In this review, we discuss recent advancements in in situ analytical tools that have the power to elucidate ecological phenomena, unveil the metabolic potential of microbial communities, identify complex multidimensional interactions between species, and compare stability and complexity under different conditions. Additionally, we highlight methods that incorporate various modalities and additional information, which in combination with abundance data, can help us understand how microbial communities respond to change in a typical ecosystem. Whilst the field of microbial informatics continues to progress substantially, our emphasis is on popular methods that are applicable to a broad range of study designs. The application of these methods can increase our mechanistic understanding of the ongoing dynamics of complex microbial communities